BRP-Wasserbehandlungsanlagen

GRP Pumping Station Exporter for Sewage & Stormwater | China Direct Plant

Teilen:

As a specialized exporter of GRP pumping stations operating directly from our ISO9001-certified production base in China, we engineer prefabricated pumping solutions that transcend the typical "box-moving" trade model. Our systems are purpose-built for municipal sewage lift stations, highway tunnel dewatering, and urban stormwater flood-relief projects —scenarios where corrosion resistance and structural integrity under high groundwater pressure are non-negotiable. Unlike general traders, we control the filament-winding process end-to-end, enabling true customization from DN1200 to DN4000 with customized inlet/outlet orientations and dual-pump duty-standby configurations. We provide full hydraulic analysis reports and 3D installation drawings prior to production, ensuring each unit matches your site's specific water head and flow rate (up to 5000m³/h). With 18 export-dedicated logistics partners, we simplify CFR/CIF procedures for Europe, Southeast Asia, and the Middle East, delivering project-grade pump stations with guaranteed GRP wall thickness and anti-buoyancy calculations—backed by a 10-year shell warranty.

Hebei Fortis Technology Co., Ltd Produktbroschüre

Pump Station

Product Advantages

Engineered Corrosion Resistance for Aggressive Media
Unlike traditional steel or cast-iron pump stations that rely on coatings to fight rust, our GRP (glass-reinforced plastic) vessels are inherently inert to hydrogen sulfide, methane, and saline groundwater. The filament-wound thermosetting resin matrix delivers uniform anti-corrosion performance across the entire inner and outer wall—no pinholes, no peeling, and no sacrificial anodes required. This makes our stations particularly suitable for acidic industrial effluents, coastal high-water-table areas, and municipal sewage with high grease content, where coated metals typically fail within 3–5 years.

Structural Strength with Lightweight Logistics Advantage
Our GRP pumping stations offer a specific strength-to-weight ratio that outperforms concrete and steel equivalents. The helically wound glass-fiber reinforcement provides a flexural strength exceeding 160 MPa, allowing the unit to withstand deep burial depths of up to 8 meters and heavy ground-load traffic (up to 60-ton axle loads). At the same time, the vessel weighs roughly 30–40% of a comparable concrete pit, which translates directly into lower ocean freight costs, easier crane handling on site, and reduced need for heavy-duty foundation works—a critical benefit for remote or access-restricted project locations.

True Prefabrication with Integrated Hydraulic Optimization
We deliver more than an empty tank—our stations arrive as pre-assembled plug-and-play systems, with internal guide rails, anti-vortex baffles, access ladders, and pump mounting bases already installed in the factory. More importantly, we use CFD (Computational Fluid Dynamics) simulation to optimize the sump geometry, minimizing sediment accumulation and vortex formation that commonly cause pump cavitation. This pre-engineering approach ensures that your actual field flow rates (up to 5,000 m³/h) match the design curves within ±3% deviation, reducing on-site commissioning time from weeks to just 48 hours.

Application Scenarios

Municipal drainage field

In the urban rainwater and sewage discharge system, the FRP integrated prefabricated pump station, as a key node for lifting and conveying, effectively solves the drainage problems in areas with low terrain, insufficient pipeline burial depth, or remote from the sewage treatment plant. Its factory prefabrication and rapid installation features can significantly shorten the construction period, reduce interference to urban traffic and citizens' lives, and at the same time, with the corrosion resistance of fiberglass-reinforced plastic material, ensure long-term stable operation in damp and corrosive underground environments, guaranteeing the smooth operation of the urban drainage system.

Fiberglass GFRP FRP Integrated prefabricated pumping station for Municipal drainage field FT-PPS3

In the field of industrial wastewater treatment

The wastewater discharged by industrial enterprises such as chemical plants, electroplating plants, and pharmaceutical plants often contains corrosive substances like acids, bases, solvents, and heavy metals. The FRP integrated prefabricated pump station uses a high-strength and corrosion-resistant fiberglass cylinder, which can resist the erosion of these chemical media, safely and reliably collecting and transporting industrial wastewater to the treatment facilities. Its integrated design is compact in size, customizable, and supports remote monitoring and automatic operation, significantly reducing the manpower investment and maintenance costs of enterprises in wastewater management.

Fiberglass GFRP FRP Integrated prefabricated pumping station for Municipal drainage field FT-PPS3

Rural sewage collection and treatment field

In vast rural areas, due to the scattered layout of villages and the incomplete pipeline network, the centralized collection and treatment of domestic sewage has always been a major environmental protection challenge. The FRP integrated prefabricated pump station provides an efficient solution to this problem. It can be installed at the low point of the village and lift the sewage discharged by each household to the main sewage pipeline or a small treatment station. The equipment is installed underground without occupying ground space, does not affect agricultural cultivation and village landscape, and has low operating noise and good sealing performance, avoiding secondary pollution to the surrounding environment.

Fiberglass GFRP FRP Integrated prefabricated pumping station for Municipal drainage field FT-PPS3

Rainwater collection and flood prevention and drainage field

During the rainy season, areas such as low-lying parts of cities, sunken plazas, underground passages, and bridges and culverts are prone to flooding. The FRP integrated prefabricated pumping station can serve as the core equipment for emergency drainage and rainwater reuse, quickly pumping the accumulated rainwater to the river to alleviate the pressure of urban flooding. At the same time, it can also be used in the rainwater collection system, raising the filtered rainwater for use in greening irrigation, road washing, etc., achieving water resource recycling and contributing to the construction of sponge cities.

Fiberglass GFRP FRP Integrated prefabricated pumping station for Municipal drainage field FT-PPS3

Parameter Specifications

Product

Integrated prefabricated pumping station

Fiberglass GFRP FRP Integrated prefabricated pumping station for wastewater treatment FT-PPS2

Model

Throughput(m³/d)

Diameter(mm)

Height(mm)

Number of pumps

FT-PPS1

2000

1200

3000

1-2

FT-PPS2

6000

1800

4500

1-2

FT-PPS3

10000

2400

10000

2-3

FT-PPS4

30000

3000

12000

2-4

FT-PPS5

50000

3800

12000

3-4

Verwandte Produkte

FRP Sewage Treatment Plant Exporter – Factory Direct for Resorts & Housing Projects

FRP Sewage Treatment Plant Exporter – Factory Direct for Resorts & Housing Projects

Factory-direct FRP wastewater treatment systems for resorts, construction camps & remote communities. ISO-certified exporter. Quick delivery & custom sizing. Request a quote.

FRP Domestic Sewage Treatment Plant Supplier – For Villa Projects | Factory Direct

FRP Domestic Sewage Treatment Plant Supplier – For Villa Projects | Factory Direct

China factory offers corrosion-resistant FRP sewage systems for off-grid hotels & housing estates. ISO certified. Custom flow rates. Fast shipping. Request bulk export quote now.

GRP Sewage Treatment Plant for Off-Grid Housing & Resorts | Factory Direct Exporter

GRP Sewage Treatment Plant for Off-Grid Housing & Resorts | Factory Direct Exporter

Factory-direct GRP domestic sewage treatment equipment for remote villas, eco-lodges, and coastal resorts. BS/EN standard certified. Modular design, 20-year shell warranty. Get site-specific layout drawing in 24 hrs.

FRP Integrated Pumping Station Exporter | Factory-Direct Stormwater

FRP Integrated Pumping Station Exporter | Factory-Direct Stormwater

China factory-direct FRP integrated prefabricated pumping station for wastewater, stormwater & flood control. Corrosion-resistant, 50% faster installation. OEM export with global certifications. Get bulk quote.

Kontaktieren Sie uns umgehend, um die Anforderungen Ihres Produktprojekts zu besprechen.

Kontaktieren Sie uns

Kontaktieren Sie uns

Tel.: +86 189 3266 2725

E-Mail: sale@hbfortis.com

Hinzufügen.: Nr. 8-1, Zhenxing Street, Stadt Matun, Kreis Zaoqiang, Stadt Hengshui, Provinz Hebei

Nehmen Sie Kontakt auf

Nehmen Sie Kontakt auf

Urheberrecht © Hebei Fortis Technology Co., LTD Alle Rechte vorbehalten | Sitemap | Datenschutzerklärung | Angetrieben von